+ Robot
+ Box filling system
+ Conveyor
+ Granulator
Dryer, Loader & Temp. Controller
+ Other equipment
+ EOAT
+ Clean Room Robot
Get acrobat
 

Mold Temperature Controller (Water and Oil Types)
HMC series

Features

 PID control for heating and cooling ensures tight temperature control.

  • Vent cycle (E593A & E716A)
  • Diagnostics
  • Max. 10 setup storage
  • Leak detection (E593A & E716A)
  • Vertical heater for easy maintenance
  • Small footprint
  • State-of-the-art MTC-II controller
Download
Catalog
Dimensions | HMC-A544D | HMC-E403O | HMC-E593A |
| HMC-E716A | HMC-E7580 |
Specification
Model HMC-E593A HMC-E403O HMC-E716A HMC-E758O
Power
supply 		3 phase 200VAC (50Hz/60Hz)
Medium Water Oil Water Oil
Temperature control range 50 °C- 95 °C 60 °C - 160 °C 50 °C - 95 °C 60 °C - 160 °C
Pump motor power 0.59KW2P
(50Hz/60HZ) 		0.4KW4P
(50Hz/60HZ) 		0.71KW2P
(50Hz/60HZ) 		0.75KW4P
(50Hz/60HZ)
Pump type Multi stage centrifugal pump Cascade pump Multi stage centrifugal pump Cascade pump
Pump pressure 60Hz 20 litters/min
0.38MPa		 10 litters/min
0.39MPa		 20 litters/min
0.48MPa 		16 litters/min
0.76MPa
50Hz 20 litters/min
0.24MPa		 10 litters/min
0.26MPa		 20 litters/min
0.32MPa		 16 litters/min
0.56MPa
Flow rate 60Hz 0.28MPa
50 litters/min 		0.30MPa
15 litters/min 		0.36MPa
50 litters/min 		0.15MPa
46 litters/min
50Hz 0.16MPa
50 litters/min		 0.19MPa
15 litters/min 		0.21MPa
50 litters/min 		0.15MPa
39 litters/min
Heater 3.0 kw 3.0 kw 6.0 kw 8.0 kw
Cooling
method 		Direct cooling Indirect cooling Direct cooling Indirect cooling
Control
system 		PID
Discharge
ports 		2
Reservoir capacity 1.3 litters
(Entire capacity 2.3 litters)		 2.5 litters
(Entire capacity 4.0 litters)		 1.8 litters
(Entire capacity 2.8 litters)		 Entire capacity
12.0 litters
Dimensions H 579 mm 579 mm
+oil inlet 44 mm		 745 mm 755 mm
+oil inlet 35 mm
W 252 mm 252 mm 283 mm 310 mm
D Unit only
603 mm 		Unit only
603 mm 		Unit only
572 mm 		Unit only
635 mm
Overall
895 mm 		Overall
777 mm 		Overall
865 mm 		Overall 795 mm
Weight 48.0 kg 52.0 kg 55.0 kg 93.0 kg
Press range 150 t or less 120 t or less 250 t or less 250 t or less
*Press range varies with mold profile and other conditions.
*The lower temperature limit of HMC-E593A & E716A can vary with the temperature of supplied water.
*Pump pressure and flow rate are based on water application.
*Overall height of HMC-403O is 623 mm, including oil inlet (44 mm).
*Overall height of HMC-758O is 790 mm, including oil inlet (35 mm).
Options
  • Medium circulating hose
  • Hose fittings
  • Air purge capability
  • 24 hour time switch
  • Weekly time switch
  • Audible alarm
  • Leakage breaker
  • External sensor
  • External start signal input
  • Return medium sensor
  • Custom color

top