|  The
dehumidifying dryer with low dew-point air provides
many benefits such as remarkably improved quality of
molded parts and reduced drying time for low running
cost.
- Hot air circulation saves 20%-40% energy over a
dryer with the same capacity.
- Simpler drying mechanism than honeycomb one minmizes
possible contamination.
- Polymer separation membrane system without moving
parts supplies uniform clean dehumidified flow.(minus
40°C of dew point)
- Conventional honeycomb dehumidifiers have used a
heater in regeneration of desiccant.Polymer separation
membrane system without regeneration process eliminates
electricity cost for the generation.
- Fifteen paercents smaller footprint than our predecessor.
- Capacities form 15kg to 150kg.
- Exposed hopper and discharge unit for easy maintenance,cleaning,and
servicing.
- Larger set value and process value displays.
- Almost the same control panel as THD-F series mold
temperature controllers.
- Mold memory allows you to save 100 setups of set
value and timer value.
- Start time is settable up to 99 hours and 59 minutes.(15
hour battery backup)
- Stop timer is settable up to 99 hours and 59 minutes.
- Display power off turns off display during start
timer run for energy saving.
- Maintenance notification notifies you when you should
service,according to the predetermined time.
- Infrared remote control(option)allows cable-less
remote operation.
|
(100kg)